Directions
from LAX to Teledyne Imaging Sensors Camarillo (about 55
miles)
- Follow
airport signs to the San Diego (405) Freeway, North.
- Head North
on the 405 to the Ventura (101) Freeway. If you stay in the
second lane from the right on the 405, you will be in position
for transition to the 101.
- Take the
101 West to Camarillo (about 35 miles).
- Take the
Pleasant Valley Road/Santa Rosa Road exit, the first exit after
coming down the Camarillo grade.
- At the
end of the exit turn right onto Santa Rosa Road. Stay in the
right lane and prepare for the next right turn.
- Turn right
on Verdugo Way and go 0.4 miles. 5212 Verdugo Way is on the
right side of the street.
Directions
from Burbank Airport to Teledyne Imaging Sensors Camarillo
(via 134 Freeway ; about 50 miles)
- From Burbank
Airport take Hollywood Way South (turn right at the light).
Stay on Hollywood Way to Alameda. You will see signs that direct
you to the freeway.
- Turn right
on Alameda and the freeway entrance will be on your right almost
immediately. The freeway you are entering is the 134 (Ventura
Freeway) which connects to the 101 West.
- Continue
on 101 North/West to Camarillo (about 45 miles).
- Take the
Pleasant Valley Road/Santa Rosa Road exit, the first exit after
coming down the Camarillo grade.
- At the
end of the exit turn right onto Santa Rosa Road. Stay in the
right lane and prepare for the next right turn.
- Turn right
on Verdugo Way and go 0.4 miles. 5212 Verdugo Way is on the
right side of the street.
OR
Directions from Burbank
Airport to Teledyne Imaging Sensors Camarillo (via 118 Freeway
; about 50 miles)
- From Burbank
Airport take Hollywood Way North (turn left at the light).
Go about one mile to the 5 freeway.
- Take the
5 North - to the 118 West.
- Stay on
the 118 West and it will turn in to the 23 freeway - you want
the 23 South. Take the 23 to the 101 West (to Ventura).
- Take the
Pleasant Valley Road/Santa Rosa Road exit, the first exit after
coming down the Camarillo grade.
- At the
end of the exit turn right onto Santa Rosa Road. Stay in the
right lane and prepare for the next right turn.
- Turn right
on Verdugo Way and go 0.4 miles. 5212 Verdugo Way is on the
right side of the street.
-
-
NOTE regarding
directions from Burbank:
Taking the
101 is the shorter and more direct route to Teledyne Scientific
Company. The reason for giving you the instructions for taking
the 5 freeway
to the
118
freeway is that the time of your arrival could make the decision
for you. If you are arriving in Burbank in the 4:00-6:00pm timeframe,
you are going to run into a lot of traffic on the 101.
There will also be traffic on the 5 and 118, but not as much.
Directions
from Long Beach Airport to Teledyne Imaging Sensors Camarillo
(about 75 miles)
- Follow
airport signs to the San Diego (405) Freeway, North.
- Head North
on the 405 to the Ventura (101) Freeway. If you stay in the
second lane from the right on the 405, you will be in position
for transition to the 101.
- Take the
101 North/West to Camarillo (about 35 miles).
- Take the
Pleasant Valley Road/Santa Rosa Road exit, the first exit after
coming down the Camarillo grade.
- At the
end of the exit turn right onto Santa Rosa Road. Stay in the
right lane and prepare for the next right turn.
- Turn right
on Verdugo Way and go 0.4 miles. 5212 Verdugo Way is on the
right side of the street.
Directions
from John Wayne (Orange County) Airport to Teledyne Imaging
Sensors Camarillo (about 80 miles)
- Follow
airport signs to the San Diego (405) Freeway, North.
- Head North
on the 405 to the Ventura (101) Freeway. If you stay in the
second lane from the right on the 405, you will be in position
for transition to the 101.
- Take the
101 North/West to Camarillo (about 35 miles).
- Take the
Pleasant Valley Road/Santa Rosa Road exit, the first exit after
coming down the Camarillo grade.
- At the
end of the exit turn right onto Santa Rosa Road. Stay in the
right lane and prepare for the next right turn.
- Turn right
on Verdugo Way and go 0.4 miles. 5212 Verdugo Way is on the
right side of the street.
Directions
from Santa Barbara Airport to Teledyne Imaging Sensors Camarillo
(about 55 miles)
- Follow
airport signs to the Ventura (101) Freeway, South.
- Head
South on the 101 to Camarillo. Exit at Pleasant
Valley Road/Santa Rosa Road.
- At the
end of the exit turn left onto Pleasant Valley Road and go
onto the overpass.
- Pleasant
Valley Road becomes Santa Rosa Road.
- Move to
the right lane and prepare for the next right turn.
- Turn right
on Verdugo Way and go 0.4 miles. 5212 Verdugo Way is on the
right side of the street.
|